Product introduce:
This Hex bolt sleeve anchor with red nylon and a DIN125 washer is a type of fastener. It consists of a hex – headed bolt integrated with a sleeve. The sleeve is equipped with a red nylon part at the bottom, which, along with the DIN125 washer, plays a crucial role in its functionality. When the bolt is tightened, the sleeve expands against the hole wall, creating a secure hold. The red nylon component helps in ensuring a snug fit and can also provide some degree of shock absorption and anti – vibration properties. The DIN125 washer distributes the load evenly, enhancing the overall stability and strength of the anchoring.
How to User
- Positioning and Drilling: First, accurately mark the location where the anchor is to be installed. Then, using an appropriate drill bit, create a hole in the base material (such as concrete or masonry). The hole diameter and depth should match the specifications of the hex bolt sleeve anchor.
- Cleaning the Hole: After drilling, thoroughly clean the hole. Use a brush to remove dust and debris, and a blower to blow out any remaining particles. A clean hole is essential for proper installation and optimal performance of the anchor.
- Inserting the Anchor: Gently insert the hex bolt sleeve anchor into the pre – drilled and cleaned hole. Ensure it is inserted straight and reaches the desired depth.
- Tightening: Use a suitable wrench to tighten the hex – headed bolt. As the bolt is tightened, the sleeve will expand, gripping the surrounding material firmly. Tighten the bolt until it reaches the recommended torque value, which can be found in the product’s technical specifications. This ensures a secure and stable
